
Exterior Painting · Islandwide Oahu
Exterior repaints on Oahu depend on prep as much as paint. We walk every elevation, address rot and failing caulk, and match the coating system to your exposure.
In every exterior painting project
Every project follows the same baseline. Specific products and quantities are confirmed after the walkthrough.
Pressure wash + full mechanical prep, elevation by elevation
Wood rot, trim, and stucco crack repairs completed before paint
Salt- and UV-resistant coating system matched to exposure
Two full coats, cut, roll, and back-brush where required
Daily site clean-up and a final walk-through with the owner
Process
Final scope, products, and schedule are confirmed after the walkthrough.
We walk every elevation with you, flag rot and spalling, and put the system spec and scope in writing.
Drop cloths, plant protection, and full masking of windows, hardware, and lanai surfaces. We stage from the smallest truck that fits.
Low-pressure detergent wash with mildewcide. Scrape, sand, and de-gloss all failing surfaces. Rinse and let dry to spec.
Wood rot cut-outs, trim rebuild, stucco crack routing and patching, caulking of every seam and penetration. Nothing gets painted until repairs cure.
Stain-blocking, bonding, or masonry primer, chosen by substrate. End grain, bare wood, and repairs get primed twice.
Cut in and roll (or spray + back-brush) two full coats to manufacturer wet/dry-mil spec. We use tinted primer under dark colors to prevent bleed-through.
You walk the job with the crew lead. Anything you flag gets addressed before we call it done.
We walk every elevation with you, flag rot and spalling, and put the system spec and scope in writing.
Drop cloths, plant protection, and full masking of windows, hardware, and lanai surfaces. We stage from the smallest truck that fits.
Low-pressure detergent wash with mildewcide. Scrape, sand, and de-gloss all failing surfaces. Rinse and let dry to spec.
Wood rot cut-outs, trim rebuild, stucco crack routing and patching, caulking of every seam and penetration. Nothing gets painted until repairs cure.
Stain-blocking, bonding, or masonry primer, chosen by substrate. End grain, bare wood, and repairs get primed twice.
Cut in and roll (or spray + back-brush) two full coats to manufacturer wet/dry-mil spec. We use tinted primer under dark colors to prevent bleed-through.
You walk the job with the crew lead. Anything you flag gets addressed before we call it done.
System options
The right coating depends on the substrate and exposure. The coating system for your property is confirmed after the walkthrough.
Interior-lot homes with limited salt exposure, Mililani, Manoa, central Oahu.
Windward and south-shore homes, Kaneohe, Kailua, Hawaii Kai, Honolulu.
Beachfront and marina-side homes, Lanikai, Portlock, North Shore.
Exterior Painting FAQ
It depends heavily on exposure. Beachfront elevations in Kailua, Portlock, or the North Shore wear on the ocean-facing walls much faster than an inland Manoa or Mililani home. We'll review the current condition and discuss maintenance expectations during the walkthrough.
Yes. We include rot cut-outs and rebuild in the scope. Painting over rotted trim is the fastest way to a callback.
Yes. We submit color chips, sample walls if required, and keep the approval paperwork on file.
We track the forecast daily and don't top-coat before rain. Our schedule builds in trade-wind windows, especially for windward jobs.
Where we work
Based in Kaneohe and scheduling walkthroughs islandwide.
Free estimate